Need 14x6 FC wheels

mrrec · #1 04-04-2006, 05:28 PM

Need 1 or 2 FC code 14x6 steel wheels dated late 67 or Jan 68. The original owner of this L78 M22 Camaro kept all 4 wheel covers and two of the wheels (and a bunch of other great stuff) and recently reunited it all with the car. So.......I need a pair of wheels.
Dave

mrrec · #2 04-04-2006, 10:16 PM

Oops, forgot that there is no date at the stem on these wheels. So.....any old FC will do.
Dave

**AMANOCC** · #3 04-05-2006, 04:55 AM

They are dated, not by the valve stem, usually about 180 degrees from the valve stem, on the flat that would hold a aftermarket trim ring clip.

68SSCamaro · #4 04-05-2006, 07:23 AM

I had a 69 dated FC wheel that was stamped near the valve stem just like a rally wheel. It's the only one I've seen like that.

mrrec · #5 04-05-2006, 04:31 PM

Actually, I looked at the orig wheels and they are dated "K-1-8" on one boss between the lug holes and "A" on another with the familiar "GM 65" on still another.
Dave

**AMANOCC** · #6 04-06-2006, 07:55 AM

Martin, whats up, long time no see, your car in paint yet?....yes the later FC got a date in the typical spot, the earlyer ones 67, 68 early 69 got the date where i mentioned....Alec

**JRSully** · #7 04-06-2006, 07:07 PM

There is a set on Ebay right now, if the link doesn't work. look under "copo"

http://cgi.ebay.com/ebaymotors/1969-Cama...053948587QQrdZ1

68SSCamaro · #8 04-06-2006, 11:55 PM

Hi Alec, haven't been doing much car stuff lately. I'm finally going to start on the car next month after owning it for over 15 years. I got the brakes bled a few weeks ago so I can drive it some before I tear it all apart. Martin

Dedicated to the Promotion and Preservation of American Muscle Cars, Dealer built Supercars and COPO cars.