The Supercar Registry

The Supercar Registry (https://www.yenko.net/forum/index.php)
-   Parts/Memorabilia - Wanted (https://www.yenko.net/forum/forumdisplay.php?f=84)
-   -   Need 14x6 FC wheels (https://www.yenko.net/forum/showthread.php?t=86244)

mrrec 04-04-2006 05:28 PM

Need 14x6 FC wheels
 
Need 1 or 2 FC code 14x6 steel wheels dated late 67 or Jan 68. The original owner of this L78 M22 Camaro kept all 4 wheel covers and two of the wheels (and a bunch of other great stuff) and recently reunited it all with the car. So.......I need a pair of wheels.
Dave

mrrec 04-04-2006 10:16 PM

Re: Need 14x6 FC wheels
 
Oops, forgot that there is no date at the stem on these wheels. So.....any old FC will do.
Dave

AMANOCC 04-05-2006 04:55 AM

Re: Need 14x6 FC wheels
 
They are dated, not by the valve stem, usually about 180 degrees from the valve stem, on the flat that would hold a aftermarket trim ring clip.

68SSCamaro 04-05-2006 07:23 AM

Re: Need 14x6 FC wheels
 
I had a 69 dated FC wheel that was stamped near the valve stem just like a rally wheel. It's the only one I've seen like that.

mrrec 04-05-2006 04:31 PM

Re: Need 14x6 FC wheels
 
Actually, I looked at the orig wheels and they are dated "K-1-8" on one boss between the lug holes and "A" on another with the familiar "GM 65" on still another.
Dave

AMANOCC 04-06-2006 07:55 AM

Re: Need 14x6 FC wheels
 
Martin, whats up, long time no see, your car in paint yet?....yes the later FC got a date in the typical spot, the earlyer ones 67, 68 early 69 got the date where i mentioned....Alec

JRSully 04-06-2006 07:07 PM

Re: Need 14x6 FC wheels
 
There is a set on Ebay right now, if the link doesn't work. look under "copo"


http://cgi.ebay.com/ebaymotors/1969-Cama...053948587QQrdZ1

68SSCamaro 04-06-2006 11:55 PM

Re: Need 14x6 FC wheels
 
Hi Alec, haven't been doing much car stuff lately. I'm finally going to start on the car next month after owning it for over 15 years. I got the brakes bled a few weeks ago so I can drive it some before I tear it all apart. Martin


All times are GMT. The time now is 11:32 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.


O Garage vBulletin Plugins by Drive Thru Online, Inc.