WTB: Horn Wire Grommet

[Mulsanne Blue]

Need (2) original assembly line installed Horn Wire to Radiator Support Grommets.

[KevinW]

What's the diameters (OD, ID) ?

[Burd]

You ever check the swap, the hardware guys have trays of grommets, I got my spedo grommet off one.

[enio45]

Is that a 70 part?

[Mulsanne Blue]

Originally Posted by enio45

Is that a 70 part?

I only know it's for a 70 Camaro. There is discussion over at Nasty Z-28 within my WTB ad that may give insight to other applications. https://nastyz28.com/threads/wtb-hor...ommets.355999/

[enio45]

Some dimensions would help......this also looks similar to the 68 Camaro rear license light wire grommet that passes thru the light mounting bracket on the rear bumper. If u can provide the dimensions or the hole size i can verify this .

[Mulsanne Blue]

Originally Posted by enio45

Some dimensions would help......this also looks similar to the 68 Camaro rear license light wire grommet that passes thru the light mounting bracket on the rear bumper. If u can provide the dimensions or the hole size i can verify this .

Don't have the grommets, that's why I'm asking. I'll measure the radiator hole this weekend.

[enio45]

The hole for the 68 Camaro rear bumper bracket is a 1 inch hole..

Here are pics of the bracket and the grommet. Grommet protects the license lamp wire going to the harness from the edge of the bracket. That corvette ref # from ZIP corvette looks to be the same #5919057 but i dont see any grommet dimensions.

I need order one for my 68