|
|
|
|||||||
| Register | Album Gallery | Thread Gallery | FAQ | Community | Calendar | Become a Paid Member | Today's Posts | Search |
|
|
|
Thread Tools | Display Modes |
|
#1
07-29-2021, 07:14 AM
|
||||
|
||||
1969 Camaro Inner Fender Dust Shields
LOCATED - thanks SYC and to James and Graeme for their offers. In particular thanks to my shop partner Paul M (Paulolds) and to a couple of Oldsmobiles who donated parts to make the dust shields possible!
Down to a few remaining parts for my project - need a pair of original 1969 Camaro inner fender dust shields. Please PM if you can help - thanks! 
Last edited by Edgemontvillage; 10-04-2021 at 03:36 PM. 
|
|
#2
09-13-2021, 10:52 PM
|
||||
|
||||
|
Hey guys, would appreciate if someone has a set and can help me out. Every 69 Camaro produced got a set of splash shields and most didn't survive but there has to be some good ones out there. I just need a full or partial set for my project. Please PM if you can help - Thanks!
|
|
#3
09-14-2021, 12:41 AM
|
||||
|
||||
|
Lloyd - If you want some of the masticated rubber with the cords showing I have some which I can send you.
- I cut the splash shields for both my LT1's, my 68 GTO, and for Bruce's pacer from the stock I have. His were in terrible shape except for the one on the drivers side which is stapled to the little metal shield & goes down under the brake booster.
__________________
~JAG~ NCRS#65120 68 GTO HO 4 spd Alpine Blue /Parchment 2 owner car #21783 71 Corvette LT1 45k miles Orig paint - Brandshatch Green - National Top Flight - last known 71 LT1 built. 71 Corvette LT1 42k miles Original paint - Black - black leather - only black LT1 known to exist. NUMEROUS Lemans blue Camaros, Monza Red and Daytona Yellow Corvettes & a Chevelle or two... Survivors, restored cars, & other photos https://picasaweb.google.com/lh/myphotos
|
|
#4
09-14-2021, 03:39 PM
|
||||
|
||||
|
Quote:
|
| The Following User Says Thank You to Edgemontvillage For This Useful Post: | ||
HuggerSS (09-25-2021) | ||
|
#5
09-24-2021, 02:12 PM
|
||||
|
||||
|
I have a real nice pair of originals here that I had eyes on recently. I will have a look for them later today and see if I can stumble across them again. I think I have the left and right sides and also have a couple of the shields for the column base complete with brackets that are also nice.
__________________
I like solid lifter cars, big cams and cars w/ 3 pedals in them. 
|
|
#6
09-27-2021, 05:47 AM
|
||||
|
||||
|
Hi Graeme, thanks for posting, sent you a PM.
|
|
|
|
Linear Mode
