![]() Dedicated to the Promotion and Preservation of American Muscle Cars, Dealer built Supercars and COPO cars. |
|
Register | Album Gallery | Thread Gallery | FAQ | Community | Calendar | Become a Paid Member | Today's Posts | Search |
![]() |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
![]()
This is a set of 4 real American Racing straight spoke Torque Thrust wheels. All 4 are 14x7 with a 1/2 positive offset. The bolt pattern is 5 on 4 3/4 inches. I trial fit these wheels on a 69 Camaro disc brake setup and the wheel clears the caliper and spins 360 degrees with no issues.
These wheels are in very good original condition. They were just found in a storage locker full of vintage parts bought at auction. I believe these have been in storage since the 80's if not earlier. All the original center caps are intact with a chipped off ear on one cap. There are a few lightly curbed areas on the far outer edge. These are very nice original Torq Thrusts. $1200 Jason ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
#2
|
||||
|
||||
![]()
Jason, your PM box is full.
Bill |
#3
|
|||
|
|||
![]()
Bill,
Thanks for the heads up. I did some cleaning. Jason |
#4
|
||||
|
||||
![]()
what does the 1/2" offset mean?
__________________
Marlin 70 Yenko Nova-350/360, 4speed M21, 4.10 Posi (Daddy's Ride) 69 SS Nova-396/375hp, 4speed M20, 3.55 Posi (Benjamin's Ride) 67 RS Camaro-327/250hp, 2speed Glide, & 3.08 Open (Danny's Ride) |
#5
|
|||
|
|||
![]()
I will have to measure but I think it is the same as 3 inch back spacing.
Jason |
#6
|
|||
|
|||
![]()
The back spacing looks to be 3 3/8 inches.
Jason |
#7
|
||||
|
||||
![]()
I see, thanks for measuring.
__________________
Marlin 70 Yenko Nova-350/360, 4speed M21, 4.10 Posi (Daddy's Ride) 69 SS Nova-396/375hp, 4speed M20, 3.55 Posi (Benjamin's Ride) 67 RS Camaro-327/250hp, 2speed Glide, & 3.08 Open (Danny's Ride) |
#8
|
|||
|
|||
![]()
Maybe I missed the mark on these. How about $950?
Thanks, Jason |