WTB 1968 Chevelle 3-speed floor shifter

[L78M22Rag]

Thanks Mark.
I think this is what I'm looking for... ?

[marxjunk]

maybe,,im not sure but i think thats thats camaro stuff because of the way the shifter pushes the handle over..like a 69 camaro type shifter..and may work just fine

Dave novaboy had one of those brackets just a few weeks ago..

but yes,,that would be what id try...but i dont think it will fit on your floor hump...i wrote this before i saw you post check it out..see the stuff i have here...see if its a little easier..but humps are cheap now

the more i look at it the more i like it..


ive done this more than a few times in the past..to the best of my memory heres what i used


i can see in the pic you have a hump/porch for a console..and that takes a diff shifter too


heres a 4 speed cross member to use a stock shifter, but i wouldnt buy one id get around it..but if you want to use a stock shifter, you need one...for a convertible or elco...and they are expensive

http://www.ebay.com/itm/ORIGINAL-69-...5n&vxp=mtr

i dont have the cutlass stuff. i pitched it..i thought id never used it and threw it in the scrap pile when i moved


heres the mount kit you need for that trans,,its rickety..but works, you get crazy and it moves..they have come a long way since the 70s or 80s..it may be fine to sell the car..but it will not fit in a console shift hump..you need a non console hump..it has more pick up points than the old sets had..may be nice now

http://www.ebay.com/itm/Hurst-367001...H4&vxp=mtr

heres the hump...but it may not fit in it either...if it where me, id call or talk to a hurst supplier. tell them you have the trans you have, and its in a chevelle floor shift with no console, they may have a better way...and the shifter may come out in the hole right..

http://www.ebay.com/itm/68-69-70-71-...Uw&vxp=mtr


its not going to be hard to change it over..it just may cost some money..but i bet you can find the shifter stuff used if you stay on ebay..thats where i get stuff for cheap when i dont want to spend money..i just educate myself and stay on it

you dont really need a 3 speed shifter either..i just used what i had and most of the time it was a used 4 speed shifter and i just left the rev rod out..worked fine..you can do it really cheap..the rods..those could be hard to get..hard to find the right ones is what i mean

[L78M22Rag]

Thanks!

[ZAPPER68]

Morning Helmut, I've got a 'new in the box' aftermarket 3 speed shifter you might be interested in. I'm on the West side of the Rockies in Kelowna. Let me know one way or the other and we'll go from there.

Regards
Cal

[L78M22Rag]

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: ZAPPER68</div><div class="ubbcode-body">Morning Helmut, I've got a 'new in the box' aftermarket 3 speed shifter you might be interested in. I'm on the West side of the Rockies in Kelowna. Let me know one way or the other and we'll go from there.

Regards
Cal </div></div>

Thanks Cal. I've got a new Mr. Gasket 3-speed shifter on its way right now. If that doesn't pan out, I'll contact you. Thanks for the offer!

Cheers