Biscayne Resto Project - Page 26

**kwhizz** · #**251** 02-13-2007, 07:28 PM

O.K. .........Start saving some Money for next year......let's have a SCR 10 1/2 on the Beach next year...

If anyone is Interested, let me know and I'll pass along Info.........Sunshine....Beach......Golf.....Good Food...and we can ruin it all by Golfing......LOL......"Right" Charley.....

Ken

**Postsedan** · #**252** 02-13-2007, 07:36 PM

Ken,

What resort did you stay at....is this on the Negril, Montego Bay, or Runaway Bay?

I spent a vacation at the Negril a few years back....what great weather and scenery.

Dan.

**SS427** · #**253** 02-13-2007, 08:45 PM

[ QUOTE ]
let's have a SCR 10 1/2 on the Beach next year........If anyone is Interested, let me know and I'll pass along info.........

[/ QUOTE ]

As already discussed, me and my sidekick are in!

Dan, he is in Negril

**kwhizz** · #**254** 02-13-2007, 09:30 PM

The pictures were taken at Sandals Negril.....looking at first full week in Feb 08...........Cumby??????

Ken

**Postsedan** · #**255** 02-13-2007, 09:40 PM

I thought it looked familiar...some of the best sunsets you`ll ever see.

Dan.

**kwhizz** · #**256** 02-15-2007, 12:59 AM

Stopped at the Body Shop again today......Progress.....Here are a couple more pic's

Going to pick up the Engine on Friday........

Ken

ORIGLS6 · #**257** 02-15-2007, 01:07 AM

[ QUOTE ]
.....looking at first full week in Feb 08...........Cumby??????

[/ QUOTE ]

That gives me a full year to save my quarters. Anybody wanna buy some 1:18 Diecast?

**kwhizz** · #**258** 02-16-2007, 03:40 AM

O.K..........The engine is finished,.......the Engine that was in the car when I bought it was a 454 block, 427 Crank,Oval Port Heads, and a Aluminum Rectangle Port #163 Manifold........Nice Combination.......Not!!
I bought a set of Rectangular Port Open Chamber Heads from Tom Williams (Wilmasboy) that were on a crate engine he put in one of his cars that he replaced with Aluminum heads..........( By the way....Tom owns enough cars to be Classified as a "Spoiled Brat" ...LOL)......these are the newer style heads that didn't have the pipe plugs in them.......I wanted the Stock appearance so I took them and had the Pipe Plugs put in for the Stock look......I know there are other things that are not exactly correct with the Engine, but "That's" O.K..........
Anyhow, we now have the Big Heads, the Block is Bored .060 and has Forged Pistons that give around 10.2 Compression, Balanced Rotating Assy, and a Crane "Blueprinted" L-72 camshaft.......Should make a "Sweet" street Motor........also got a Repro set of 827/828 Exhaust Manifolds from Chuck (427King)......the Manifolds need the parting line flash to be cleaned up a little, but except for the machined bosses where the bolts hold them to the head, they are Pretty close to Original

Chip.......The Engine Builder

827/828 Manifolds

Ken

**Xplantdad** · #**259** 02-16-2007, 05:03 AM

Nice Ken...should be looking fine really soon! BTW, check your PM's when you get a chance...

**Postsedan** · #**260** 02-16-2007, 05:21 AM

Ken,

Very nice....your getting that much closer to Lombard.

Dan.

Dedicated to the Promotion and Preservation of American Muscle Cars, Dealer built Supercars and COPO cars.