Chevelle updates

[Too Many Projects]

You should have bent the float wire until the gauge read a quarter tank with the 5 gallons in there. They ALL seem to need bending to read anywhere near correct. They package them in the smallest box possible, which has the float up tight against the tube and it wouldn't fit like that with the wire bent out for the float to be in the correct location...

[RPOLS3]

Originally Posted by Too Many Projects

You should have bent the float wire until the gauge read a quarter tank with the 5 gallons in there.

Absolutely correct - in retrospect I wish I would of.

At this point I'm just happy it works and it is all back together so I can enjoy it. Got it cleaned up and ready to driving season this morning after the fill up.

[Too Many Projects]

Glad you have it together to drive and enjoy in the mean time. Curiosity...what does the gauge read with the tank full ?
I'm rebuilding the seats for my '66, hoping to have it presentable for shows this summer. Found out the hard way that the GTO buckets I bought as cores 15 years ago are different than Chevelle...who knew. I'd always heard they are all the same seats, not true, Back rest springs are very different.

[RPOLS3]

Originally Posted by Too Many Projects

Glad you have it together to drive and enjoy in the mean time. Curiosity...what does the gauge read with the tank full ?
I'm rebuilding the seats for my '66, hoping to have it presentable for shows this summer. Found out the hard way that the GTO buckets I bought as cores 15 years ago are different than Chevelle...who knew. I'd always heard they are all the same seats, not true, Back rest springs are very different.

Reads 3/4 when full, so an adjustment to the float is in order.......

I feel your pain on the seats, just went through this with the seat backs on the 409, Impala is different than Biscayne or BelAir..........which is not what the rest of the world thought when I bought the bench seat........

[Too Many Projects]

Your seat ordeal came to mind when I was informed about my seat issue...

A guy on Team Chevelle is really good with these seats and is making up new upper spring sets for me to convert the BOP springs to Chev. Very lucky to have found him and his willingness to help me out. VERY reasonable on cost too.