|
|
|
|||||||
| Register | Album Gallery | Thread Gallery | FAQ | Community | Calendar | Become a Paid Member | Today's Posts | Search |
|
|
|
Thread Tools | Display Modes |
|
#1
03-10-2025, 06:44 PM
|
||||
|
||||
1967 Camaro fender emblem locations
I made a template of the 350 and V8 flag from the left fender. Flipping it over it SHOULD have produced the same location on the left as a mirror image. The 350 and flag emblems are about 3/8" lower on the right fender. They both appear to be GM and possibly factory installed. The rs trim holes are punched, as original, not drilled as most replacements.
Anyone with an original '67 SS 350 car that could measure from the bottom of the camaro emblem to the top of the 5 in 350 and the crossbar in the V for me ? The m lines up great with both. Thanks
__________________
Mitch 1970 Chevelle SS 1966 Chevelle SS 1967 Camaro ss/rs 1938 Business coupe, street rod 2000 FXSTS, original owner, 13k miles 
|
|
#2
Yesterday, 05:45 PM
|
||||
|
||||
|
No one that can help me out with this measurement ???
I'd like to drill these holes before putting the fenders in final prime. Thanks
__________________
Mitch 1970 Chevelle SS 1966 Chevelle SS 1967 Camaro ss/rs 1938 Business coupe, street rod 2000 FXSTS, original owner, 13k miles
|
|
#3
Today, 02:25 AM
|
||||
|
||||
|
Thanks for the help.
__________________
Mitch 1970 Chevelle SS 1966 Chevelle SS 1967 Camaro ss/rs 1938 Business coupe, street rod 2000 FXSTS, original owner, 13k miles
|
|
|
|
Linear Mode
