Doing some measuring while I wait on he mechanic to work on the pinion seal again - I've done some measuring and angle finding.
Looks like I need to lower the rear of my car - as the rear lower control arms are pointing upwards about 8 degrees. I don't know that I understand why, as the rear springs are from a 1970 Chevelle SS 396 that didn't have A/C or anything on it.
Is there a known good spring for these cars - or should I get lowering springs?
Anyway, if I can get the lower control arms level that should angle the top control arms down - hopefully that would help my wheel hop problem.
Thanks for any help!!!!!
|
10-20-2023, 11:12 PM
Hybrid Mode
