Original owner factory paint '65 Corvette refresh

[TimG]

So many good stories about these cars and how they were ordered. I remember Ken's '65 arrived in March, two months early, but he was graduating from UM Rolla with an engineering degree, and he couldn't start making payments until May, so he asked the dealership to store it until he graduated. The bank told him to take the car and start making payments when he graduated. You're correct, Bill.

[67since67]

On Saturday after we unloaded the Corvette Brian wasted no time, giving it a wash and moving cars around to get it in his shop. He is taking point on this job, I will assist.
Monday he brought me the speedo and tach panel, the clock, and the AM/FM radio with speaker to send out.
Brian is a C3 guy with two LT-1's but he has a real soft spot for this C2 coupe!

On Tuesday I made contacts with vendors and packaged and shipped out the dash components.

The radio only had AM, It is off to Howard Foulds in NJ.
The speaker had holes, it is off to JV Restoration in CA.

Shout out to Tim S. for recommending Rick's Restoration in MD!

The speedo, tach and clock are going to Rick.
The speedo and tach had been done in '08, but was registering 10% slow and the odo and trip were in-op.
All three vendors promised about 2 week turn-around.

[napa68]

Originally Posted by 67since67

On Saturday after we unloaded the Corvette Brian wasted no time, giving it a wash and moving cars around to get it in his shop. He is taking point on this job, I will assist.
Monday he brought me the speedo and tach panel, the clock, and the AM/FM radio with speaker to send out.
Brian is a C3 guy with two LT-1's but he has a real soft spot for this C2 coupe!

On Tuesday I made contacts with vendors and packaged and shipped out the dash components.

The radio only had AM, It is off to Howard Foulds in NJ.
The speaker had holes, it is off to JV Restoration in CA.

Shout out to Tim S. for recommending Rick's Restoration in MD!

The speedo, tach and clock are going to Rick.
The speedo and tach had been done in '08, but was registering 10% slow and the odo and trip were in-op.
All three vendors promised about 2 week turn-around.

Glad to hear Rick could help you out. He's been a real asset to me

[67since67]

Originally Posted by TimG

So many good stories about these cars and how they were ordered. I remember Ken's '65 arrived in March, two months early, but he was graduating from UM Rolla with an engineering degree, and he couldn't start making payments until May, so he asked the dealership to store it until he graduated. The bank told him to take the car and start making payments when he graduated. You're correct, Bill.

Puzzling to me Tim, how two similar Corvettes, both ordered December 31st, built on the same assembly line, both delivered in March, could be 2,871 VIN's apart from each other?

Possibly, the VIN was not assigned until the posi availability issue was resolved??

But then, both delivered in March?? Would be interesting to determine the build dates.