Scuncio Chevelle ex-L78

[TomN]

Thanks Donnie. Converter is in the car now - so when I get the car back home from the mechanic's house, who is doing the work for me, I'll see what pictures I can come up with

I believe from what I remember the trans is from a 1970 or 71 Impala (from the trans code on the side of the case). Also the shifter lever is for a column shifter - we are swapping that out this week for one for a floor shifter.

[Too Many Projects]

If the converter is still from the Impala, it's not going to work with the L78 cam, as you are aware of. You'll need a converter to match the application, with a higher "stall" speed, either a rebuilt original or an aftermarket tuned to the cam.

[WILMASBOYL78]

Originally Posted by Too Many Projects

If the converter is still from the Impala, it's not going to work with the L78 cam, as you are aware of. You'll need a converter to match the application, with a higher "stall" speed, either a rebuilt original or an aftermarket tuned to the cam.

The idle aspect is only part of the transmission issue...the hi-perf trannys used behind the L78 were special built units. They had stronger internals, the 6 lug high stall converter, a hi shift point governor and other unique features. There was an old thread about this, not sure if the info is still accessible.

https://www.yenko.net/forum/showthre...ighlight=trans