Screws, license plate

[60sStuff]

WTB,

A handful of Nice Original factory license plate screws and their square plastic nuts.

Photos for reference of what I need.

Thank You, Chris

[camarojoe]

What's special about these vs. what's available virtually everywhere?

[R68GTO]

2 prong nuts vs 4 prong. I think Enoch on this site just posted some 2 wrongers not too long ago

[60sStuff]

Originally Posted by camarojoe

What's special about these vs. what's available virtually everywhere?

Hi Joe,

Please direct me to the source that has these 60’s OEM license plate screws and the plastic nuts that I show.

Thank you.

[Geoff Padgett]

Originally Posted by 60sStuff

WTB,

A handful of Nice Original factory license plate screws and their square plastic nuts.

Photos for reference of what I need.

Thank You, Chris

I have three of the nuts and one screw. If you are Interested how about $20. I can either stick them in an envelope or I'm local in Salinas and if you are passing through..... Thanks, Geoff.

[60sStuff]

I found what I was looking for, thanks to R68GTO for the lead.

Enoch supplied me with OEM fasteners for the 60’s license plates.

Thx, Chris.

[firstgenaddict]

LAst time I bought them from the local fastener company
They are distributed by AU VE CO products-
Catalog lists 3 different part numbers for use with a 1/4" / #14 screw - (2 with 2 legs and 1 with 4 legs)

AUVECO part#'s listed.

PN 3682 -50pcs/bx - 2 leg measures .625 square and the protruding pegs are .390 across at the widest -

PN 8435 -50pcs/bx - 2 leg measures .625 square on the face - the protruding pegs are .395 across at the widest -

PN 11719 -50pcs/bx - 4 legs .600 square on the face - protruding pegs are .415 across at the widest