Dedicated to the Promotion and Preservation of American Muscle Cars, Dealer built Supercars and COPO cars. |
|
#1
07-19-2021, 07:25 PM
|
|||
|
|||
Valve Stem Caps ID
I came across an old Maxwell House coffee can full of valve stem caps. There are numerous different ones but these are some I am trying to ID. Thanks, Larry
|
|
#2
07-20-2021, 03:11 PM
|
|||
|
|||
|
1st and 3rd picture have the caps that are worth $20-50 each.
3rd picture should say Schrader on the bar ontop. Both mentioned are Good Gm 60's to early 70's assembly line installed pieces. Last edited by Enoch; 07-20-2021 at 03:13 PM.
|
| The Following 2 Users Say Thank You to Enoch For This Useful Post: | ||
lbnaz (07-21-2021), PeteLeathersac (07-21-2021) | ||
|
#3
07-20-2021, 07:32 PM
|
||||
|
||||
|
Hi Larry,
The second photo with the USA on top of the cap is what was installed on my mid-60’s “American Racing Wheels” Torque Thrust when new. They mounted on a DILL valve stem. The last photo shows the correct cap (DILL 627) which came on both my Survivor GTO’s. I would be very interested in 4-8 Nice USA Star caps shown in second photo. Thank you, Chris.
|
| The Following 2 Users Say Thank You to 60sStuff For This Useful Post: | ||
lbnaz (07-21-2021), olredalert (07-21-2021) | ||
|
#4
07-21-2021, 12:58 AM
|
|||
|
|||
|
Hello, yes the 3rd photo has schrader on them. I never noticed the USA on the 3rd one until you point it out. Its there almost need magnifying glass but its there. thanks, Larry
|
|
#6
07-23-2021, 01:12 PM
|
||||
|
||||
|
Hard to believe the hobby has progressed this far…wouldn’t be shocked if someone starts reproducing the assembly line correct valve stems.
Do the judges deduct points for missing originals?
__________________
|
| The Following User Says Thank You to DW31S For This Useful Post: | ||
lbnaz (07-23-2021) | ||
|
#7
07-23-2021, 02:13 PM
|
|||
|
|||
|
I know the NCRS judges deduct for the incorrect valve stem caps.
|
|
#8
07-26-2021, 04:12 PM
|
|||
|
|||
|
the ones in the first pic....would you sell a set?
|
 |
|
|
Linear Mode
