Help with cam number 1H284-S

**chevyandpontiac** · #1 01-29-2021, 03:19 PM

Can anyone tell me what this cam is?

thanks

**chevyandpontiac** · #2 02-01-2021, 02:22 PM

I didn't think this would be that hard. Any one know what manufacture uses those number?

**Tracker1** · #3 02-07-2021, 11:07 PM

Is it a Comp Cams Hydraulic 284 Dur. ? I've run that cam in the past and that looks familiar

**Hotrodpaul** · #4 02-08-2021, 04:30 PM

Could be a Comp 284 Solid cam, specs:

Mechanical Flat Tappet - Lift 0.597 / 0.606 in - Duration 284 / 293 , 258/264 @ .050"- 107 LSA - 3300 / 7300 RPM

This would be a little much for the street.

racer67x · #5 02-08-2021, 08:23 PM

Isky used to number cams in a similar way also..might check there.

stock class at a local circle track the popular cam was an Isky 280H,which was hyd and about 500 lift.

its worth a shot.

**Hotrodpaul** · #6 02-09-2021, 11:31 AM

Do you have a shortblock to throw it in? I would degree it just to be safe.

**chevyandpontiac** · #7 02-09-2021, 12:56 PM

I think I am going to put it in the metal dumpster. Too many thoughts on what is could be, so it will be scrap. LOL

**scuncio** · #8 02-09-2021, 01:30 PM

Is it new? Can you put it in the Tony pile? A friend of mine has a Cam Doctor...I can run it for you.

**chevyandpontiac** · #9 02-09-2021, 05:21 PM

It is not new, but it is in nice shape and I do have the lifters also. And yes I kept the lifter is the correct order.

**mr.4speed** · #10 02-09-2021, 07:39 PM

DEFINITELY A General Kinetics Cam logo

The Following User Says Thank You to Tracker1 For This Useful Post:
chevyandpontiac (02-08-2021)

Dedicated to the Promotion and Preservation of American Muscle Cars, Dealer built Supercars and COPO cars.