The Crusty Cuda: Whole lotta Shakin' (N96) Goin' on!

[Ryan1969Chevelle]

I am loving every post!!!

This car is going to be amazing!!!

Ryan W31

[scuncio]

Nice work. As I get older, I’ve become downright disgusted with the quality of repop/modern “old car parts” in general. Just today I bought some 50 year old 1157 bulbs on eBay because the Sylvania replacements have shorter pins that don’t engage properly in the sockets. I’d rather look a little harder for old stock, which is still quite easy to find, and rarely more expensive than the junk you find at auto zone.

[njsteve]

The Boy and I installed the windshield today.

I had him watch around 30 seconds (about as mush as either of us could tolerate) of a Graveyard Cars episode where they had a couple glass guys install the windshield on a 71 Limelight Green 'cuda (and randomly dubbed in a 70 Challenger install during the scene for no apparent reason other than it was also Limelight).

We then wandered out to the garage, stuck the four suction cups on the glass and plunked it in place. I had already placed the 5/16" butyl tape in place last night. It all went in uneventfully.

It took a few hours for the weight of the glass to gradually settle down and seal all the way around. I had to stick in the rubber blocks as well as some wooden shims to keep it fromm drooping down but it seems to be holding now.

The AMD glass is nice and thick, like an original windshield. It even has a Chrysler logo in the center like the originals do.

Sorry for the blurry photo. I did some black friday shopping today for new phones for the wife and the boy. So I can get one of their more modern hand-me-downs when they come in.

[njsteve]

I also installed my old set of wooden pistol grips that were previously on my orange 1971 Six Barrel 'cuda ragtop in 1985, and then on the red 70 Hemi Charger R/T-SE in 1990. When I sold that car in 2013, they went into a box in the closet. I bought them at the 1985 Mopar Nationals back in the day. Some eccentric dude from Colorado hand-made them out of Cocobolo wood with some crazy wood-working duplicating lathe. I have an extra unfinished set that still needs final sanding.