Heavy Lifting

[Lynn]

Engine lift plate on the four carb studs if it is just the engine w/o the trans.

Much easier than chains bolted into random holes.

Like this, but you don't have to buy on line. Many auto parts stores have them.

https://www.summitracing.com/parts/w...UaAsawEALw_wcB

[earntaz]

Originally Posted by Lynn

Engine lift plate on the four carb studs if it is just the engine w/o the trans.

Much easier than chains bolted into random holes.

Like this, but you don't have to buy on line. Many auto parts stores have them.

https://www.summitracing.com/parts/w...UaAsawEALw_wcB

Saw this done on a 396 with alum intake ... plate was bolted to the carb mounting with Pick-a-nut bolts. Dropped the engine from about 4' ... two bolts broke and two stripped the treads ...

[chris slawski]

Originally Posted by Lynn

Engine lift plate on the four carb studs if it is just the engine w/o the trans.

Much easier than chains bolted into random holes.

Like this, but you don't have to buy on line. Many auto parts stores have them.

https://www.summitracing.com/parts/w...UaAsawEALw_wcB

Yes thanks Lynn seen and have one....this is just the short block...no heads, no intake.