Dedicated to the Promotion and Preservation of American Muscle Cars, Dealer built Supercars and COPO cars. |
|
|||||||
| Register | Album Gallery | Thread Gallery | FAQ | Community | Calendar | Become a Paid Member | Today's Posts | Search |
|
|
|
Thread Tools | Display Modes |
|
#161
11-27-2019, 10:35 AM
|
||||
|
||||
Progress moving forward as the final parts come in, but it'll slow down again. I'll be in training the entire month of December so Crusty's fire up will be delayed until next month.
 But fear not! They'll still be updates on minor things that need to be done!  Here we see the correct Road Lamps bezel installed as well as the correct rear speaker knob and bezel that I finally found. I was missing thev retaining nut (I'm missing a lot of nuts! Or it's that screws?  )Also, I had the correct dual point Prestolite distributor rebuilt and restored and that's headed this way! Gas tank is in and the emergency brake cables are installed. Let's see... front emergency brake cable, shocks, a few things in the engine bay along with the tires mounted and she should fire right up!  More to come.... sometime soon!   Cheers  Dave 
|
| The Following 2 Users Say Thank You to A12pilot For This Useful Post: | ||
427TJ (11-27-2019), big gear head (11-27-2019) | ||
|
#162
11-27-2019, 03:37 PM
|
||||
|
||||
|
Heading along a break-neck speed once again there Dave. Last thing I remembered was the shop being built, the car listed then pulled back, and now I see all this progress in a very short time frame. You da man, and it's lookin' like a fun little project.
Hats Off... 
__________________
I like solid lifter cars, big cams and cars w/ 3 pedals in them. 
|
|
#163
12-15-2019, 11:06 AM
|
||||
|
||||
|
The break neck speed is slowing down, but should resume early next year!
Training is taking up the entire month and since the job does have priority (unless someone wants to pay me to do all of this work! ) so a month or so break isn't all that bad, really. Brakes are done on the back and what about the front you say? Oh, you know how that goes. Seized and rounded off bolt heads on unreachable wheel cylinder bolts means the whole brake backing plate on both front wheels needs to come off.  headed home for three days and that'll be done shortly. When Mopars got Ralleye or Road wheels, the face of the drums were painted red. I have the factory bulletin explaining that, but can't find it on my phone. The red paint was supposed to be on the outer face of the brake drum and should not be touching the studs. But we're all understanding the cars we're built by humans and sometimes those rules weren't really followed exactly. Here's the remnants of the red paint on one of my drums. More to come! Cam break -in is immmammmamnent!  Cheers Dave
|
| The Following 2 Users Say Thank You to A12pilot For This Useful Post: | ||
big gear head (12-15-2019), markinnaples (12-15-2019) | ||
|
#164
12-17-2019, 04:26 PM
|
|||
|
|||
|
Yes, they were very precise when they did the red
 . Here are the drums from my 12,000 mile 'Bird. They were really painted heavy. I have seen many with less coverage as well. The wheels were put on while the paint was still wet and the back of them often showed red paint and drips as well.
|
| The Following 3 Users Say Thank You to RS_COPO_Canuck For This Useful Post: | ||
|
#166
12-31-2019, 10:53 AM
|
||||
|
||||
|
It’s getting closer! My training is wrapped up and I have some more time to finish up some loose ends. But my main focus will be to get the 51 Ford truck back to it’s owner next month. Meanwhile, brakes are done, and of course, that just couldn’t go smoothly
 . Seized bolts in the front wheel cylinders made for a quick (long) front backing plate removal and drill out of the old bolts. Which wasn’t overly bad minus the added 4hrs it took to do a :30 minute job. But hey? When has anything you’ve ever done on a car gone exactly according to your original time estimates? New F70 rubber from Rusty is mounted up! Last items are under the hood with a master cylinder bench bleed and then install, distributor wires, and wiper motor/linkage, then the front windshield. That should do it! More to come!!! Cheers Dave
|
| The Following 4 Users Say Thank You to A12pilot For This Useful Post: | ||
big gear head (12-31-2019), markinnaples (12-31-2019), olredalert (12-31-2019), PeteLeathersac (12-31-2019) | ||
|
#167
12-31-2019, 03:42 PM
|
||||
|
||||
|
Handsome steed and looking loverly with its rich patina, Dave. Keep having fun with your 32 or so projects you have going on!!!
__________________
Sam...  
|
|
#169
12-31-2019, 09:35 PM
|
||||
|
||||
|
You are a great source of entertainment (and even edumacation)! No excuse for my absence this year, but I’ll be there with bells on next year!!
__________________
Sam...
|
|
#170
12-31-2019, 09:54 PM
|
||||
|
||||
|
Thanks, Sam! Yes, my entertainment quotient is directly proportional to my lack of integrity and imaginative vocabulary. Sort of like figuring out the hydroplaning speed of a tire....it’s that precise!
 See you next year! Cheers Dave
|
|
|
|
Linear Mode
