Lynn,
Those tire heights I posted were directly off the Kelsey website using their Goodyear Widetread specs. Just guessing at what the above scenario in Post #3 might have been?
I'm planning on mounting the new FR's on a set of Torque Thrust as they are my favorite wheel on these cars. I'm thinking I should be OK on the front of this Z/28 I acquired since the third owner installed new front springs and the car sits about an inch higher on the front. Fingers crossed on the shorter 60's working on a 7" wheel.
I'd run a 70 series on the front, but Coker only offers an F70 and a G70 both of which are an inch plus taller than the FR60's according to their specs?
__________________
I like solid lifter cars, big cams and cars w/ 3 pedals in them. 
|
10-19-2019, 08:43 PM
Threaded Mode