Ryan Weaver's 1969 Olds Cutlass S W31 Club Coupe

[Ryan1969Chevelle]

Originally Posted by Postsedan

Ryan,

Great news about the Stager’s :-)

Please invite the Stager’s to my Party on Saturday

Dan

Thanks Dan, I will extend the invitation:-)

Ryan

[Ryan1969Chevelle]

I spent the afternoon, jacked up the frame, washed every nook and crannie.

I removed the trans cross member to paint it bare steel. I started getting the brakes ready to assemble.

I need to get Boe-Shield for the non painted items.

Ryan

[Ryan1969Chevelle]

Goal: Rolling Chassis.

[earntaz]

Originally Posted by Ryan1969Chevelle

I spent the afternoon, jacked up the frame, washed every nook and crannie.

I removed the trans cross member to paint it bare steel. I started getting the brakes ready to assemble.

I need to get Boe-Shield for the non painted items.

Ryan

Ryan -- here is San Antonio, I found Boeshield at the local Bass Pro Shop ... Craig

[Ryan1969Chevelle]

Originally Posted by earntaz

Ryan -- here is San Antonio, I found Boeshield at the local Bass Pro Shop ... Craig

Thanks!!!

I have heard it is at a local craft store.. Northernforce.....

Ryan

[Ryan1969Chevelle]

Did some W31 running around today.

Reorganized the igloo and brought home 2 SS11’s, 2 tires, 5 14 X 6 steel wheels (I finally created a full set!!!)

I brought home my M20, my original bellhousing. (I want to assemble the car as close to original as possible. (I have so many parts to hop it up after)

I raced to a local store to get Boeshield, I am going to coat anything not painted in that stuff. A year of sitting in the igloo has shown me the non painted parts would end up looking like crap unless I protect them. Lines, clips, bolts, nuts, etc are getting Boeshielded :-)

Ryan

[Ryan1969Chevelle]

Thanks Northernforce :-)

Lee Valley Tools:-)

Ryan