New format for the site

[68l30]

Ha! It's the one thing I figured out!

Snow is falling now....

BIG

[CC Rider]

Originally Posted by 68l30

Rick, Click on user CP in the left corner at the top of the page, go to edit options... Scroll down to you see this and edit to whats shown in my box. Just fixed mine...

BIG

Thank you so much!

[Donnie]

Originally Posted by camcojb

It should be fixed. Can you mark all forms read when you're done reading? It won't retroactively fix things but from now on it should show only new unread posts.

yes I was able to mark all forms read.

so this is the way I have to get them to show as old now? it wont just do it when I back out of a thread.

[Donnie]

Originally Posted by Xplantdad

By doing this:

Thanks Bruce

[camcojb]

Originally Posted by Donnie

yes I was able to mark all forms read.

so this is the way I have to get them to show as old now? it wont just do it when I back out of a thread.

It should work automatically, just wanted to get you to a known good starting point. Now that you've marked them all it should work.

[John]

....Let's see if I get these to work...

[GaryW]

I like the new format and changes much better than the old... Now I can come in, click on 'new posts' and see any new post since I was in last... works like most of the other forums I frequent..

[John]

..How do I get it to take me to the post that I have already been reading ... and takes me to the section or page that I last read so I can read the new comments without going back to the FIRST page

[lbnaz]

How do you respond to PM's and send new ones. I have received several PM's about parts and have tried responding on the reply area. It never shows up as part of the correspondence on the PM. I have sent several testing PM's to members with no reply also. Thanks, Larry

[camcojb]

Originally Posted by lbnaz

How do you respond to PM's and send new ones. I have received several PM's about parts and have tried responding on the reply area. It never shows up as part of the correspondence on the PM. I have sent several testing PM's to members with no reply also. Thanks, Larry

Go to user cp, then scroll down and click "edit options". There is a section on pm's, make sure pm's are enabled and make sure to check the box to save sent pm's in a sent folder, otherwise you will not see them.