ZL1 # 48 coming to Barrett-Jackson

[camaromb]

The Canadian title history shows the car was registered in 2006 with no prior title history.

Incorrect/missing/questionable firewall items:

- RS hole in non-RS car
- incorrect cowl induction wiring location, not at the Norwood plant dimple location, LA plant had no dimple to locate.
- missing the cowl induction switch wiring clip hole.
- missing the cowl induction relay screw hole.
- missing the wiring gutter screw holes in the face of the vin-stamped cowl panel.
- missing the factory dimples in the face of the vin-stamped cowl panel, below the pass. side washer nozzle area.
- LA typical cowl foam glued to the top of the cowl on both sides, Norwood plant typically glued them to the underside of the cowl panel.
- missing the sealant around the complete heater box and vin stamped area but sealant is evident on the complete firewall seam and driver's side
firewall area.