Gary scored a CCW-12 bolt for Taylor's Chevelle!
 

My brother Gary was able to get a CCW coded 12 bolt for Taylor's Chevelle. It came with the upper and lower control arms and the sway bar,and all of the bolts, too!

Here's what it looked like before cleaning...

http://i19.photobucket.com/albums/b1...psd1e5f924.jpg



Decodes to April 22, 1970 Buffalo, second shift?


http://i19.photobucket.com/albums/b1...ps94c7f193.jpg


Back side view!

http://i19.photobucket.com/albums/b1...psf98052a7.jpg


After using the pressure washer...

http://i19.photobucket.com/albums/b1...psc0b320bf.jpg



Cleaned up pretty well (so far)!

http://i19.photobucket.com/albums/b1...ps47b44e52.jpg

Re: Gary scored a CCW-12 bolt for Taylor's Chevelle!
 

from http://chevellestuff.net/1970/rear_axle.htm

CCW 3.31:1 ~ 12-bolt (L34/402 & LS3/402 M.C.)*

Good find.

Is this going into an SS396/402 70 Chevelle?

Ryan

Re: Gary scored a CCW-12 bolt for Taylor's Chevelle!
 

Bruce, would you mind sending me some hi res shots of the rear (after) it was cleaned. I noted the yellow inspection mark on the flange where the tube fits into the housing. Also appears to have maybe an "8" on the bottom side of the housing but can't really tell for sure.

Re: Gary scored a CCW-12 bolt for Taylor's Chevelle!
 

Rick,

Let me know how many different angles you'd like. I'll run over and get you some pics....I just tried calling you as well [img]<<GRAEMLIN_URL>>/smile.gif[/img]

Ryan, this is going into a 1970 Chevelle

Re: Gary scored a CCW-12 bolt for Taylor's Chevelle!
 

Any angle that shows the inspection mark is good. Sorry I missed your call. Been at the shop all day and the cell does not work inside so I did not hear it ring.

Re: Gary scored a CCW-12 bolt for Taylor's Chevelle!
 

Okay...will do Rick!

Re: Gary scored a CCW-12 bolt for Taylor's Chevelle!
 

Nice axle, that thing sure did not live around here, if you know what I mean.. [img]<<GRAEMLIN_URL>>/grin.gif[/img]

Re: Gary scored a CCW-12 bolt for Taylor's Chevelle!
 

I know what you mean Mike!

Re: Gary scored a CCW-12 bolt for Taylor's Chevelle!
 

Here's what it looked like before it was removed. We have the sway bar and all of the misc stuff that goes with it [img]<<GRAEMLIN_URL>>/smile.gif[/img]

Re: Gary scored a CCW-12 bolt for Taylor's Chevelle!
 

Rick, I should be able to get the pictures tomorrow?