The Supercar Registry

The Supercar Registry (https://www.yenko.net/forum/index.php)
-   Technical & Restoration (https://www.yenko.net/forum/forumdisplay.php?f=86)
-   -   Correct part number for 67 BB motor mounts? (https://www.yenko.net/forum/showthread.php?t=172892)

bergy 08-22-2022 12:47 PM

Correct part number for 67 BB motor mounts?
 
Having trouble finding the correct 67 BB Camaro motor mount part number. I have #701s, but that may not be correct?

Thanks

Chuck_Burg 08-24-2022 07:02 PM

3912597
3912598

Chuck_Burg 08-25-2022 04:21 PM

Not sure if that's what you're looking for, these are the frame mounts..

bergy 08-25-2022 04:48 PM

Thanks Chuck. I have the original frame mounts. Wanted the motor Side mounts #. I found a set.

Mr70 08-25-2022 05:08 PM

You found a set?,can you relay the part#'s?

bergy 08-25-2022 05:40 PM

I haven’t received them yet. Non-locking early take offs. I believe 3886466

jeffschevelle 08-26-2022 02:29 PM

3886466 is the part number shown for 67 Camaro 396 in the July 1967 parts book revision. Those are the ones without an affixed nut on either side.

The 67 Camaro AIM does not show mounts in L35/L78 sections, which means they should install same as the 283 small block V8 mounts as shown in Section 6. Section 6 shows mounts without any affixed nuts and shows a loose washer and nut being used. So 3886466 is most likely assembly line correct.

Trivia - 65-67 Chevelle 396 assembly line mounts were the exact same design mount except with an affixed nut on the rear facing side, so they are left-right specific. (It is all but impossible to find a good set of those.) The 67 Chevelle part numbers were 3886467 and 3886468. But the initial service replacement part was 3886466 for both sides (supply your own nut, I guess).


All times are GMT. The time now is 08:09 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.


O Garage vBulletin Plugins by Drive Thru Online, Inc.