|
CE 060XXX TO318 9654 block . . .
Should the above CE 1970 block have 4 bolt main caps numbered #964, or 2 bolt main caps number coded #362?
This block is also stamped G9 9 which means what exactly? Thanks in advance gennelmen! Ted |
Re: CE 060XXX TO318 9654 block . . .
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: ted</div><div class="ubbcode-body">Should the above CE 1970 block have 4 bolt main caps numbered #964, or 2 bolt main caps number coded #362?
This block is also stamped G9 9 which means what exactly? </div></div> Will probably need to put up some pics of both, stamp (G9 9) to see where it is located and oil filter area of block to determine if 2 or 4 bolt. Looks like it was assembled on March 18th. The G 9 9 where is this stamped? Generally, G would indicate July and 1st 9= day of month and other 9= year. But without seeing, it is impossible to say at this point. |
Re: CE 060XXX TO318 9654 block . . .
Are you sure the casting number is not ....854???
If so, this block was produced in both 2 bolt and 4 bolt main depending on the use. wilma |
Re: CE 060XXX TO318 9654 block . . .
Number is 854 Wilma.. I have it noted that G9 9 is on rear of block deck. Near oil filter mount is Hi Perf Pass
Under timing cover is a G7 .. Ledge where starter bolts up to is a T 089 . Do not remember if this is 'scrawled' or punched. Will have to wait to see oil filter area, maybe a month or two. What am I looking for here exactly? Again, I will get back as soon as I can on the above 854 CE block. Thanks for the help! Ted in Montreal |
Re: CE 060XXX TO318 9654 block . . .
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: ted</div><div class="ubbcode-body">Should the above CE 1970 block have 4 bolt main caps numbered #964, or 2 bolt main caps number coded #362?
This block is also stamped G9 9 which means what exactly? Thanks in advance gennelmen! Ted </div></div>G 9 9 is a date code. July 9, 1969. So it's a 69 cast block. The "TO318" is actually "T0318." Zero, not O. Stands for Tonowanda built March 18. More than likely your "6" should be an "8" for your "9654". I'd double check your stamp pad. March is way too far out for a July block. Might be normal for a CE block though? I don't know. Maybe post some pics? Does it look like the below pic? Big block 402? http://i1164.photobucket.com/albums/...803_143337.jpg |
Re: CE 060XXX TO318 9654 block . . .
Thanks for the reply Sgt Hawk. I have pics (couple) of this block, but, I need an E-mail address to send 'em to.
If you could help and then post them on to the Board, I will envoy the photos later.. Ted in (freezing rain) Montreal |
Re: CE 060XXX TO318 9654 block . . .
No problem. I'll pm you my email.
|
Re: CE 060XXX TO318 9654 block . . .
I just got your email. Here you go Ted. Sure looks like the T0318 ET is re-stamped to me, but I don't have a lot of experience with CE blocks.
http://i1164.photobucket.com/albums/...20%20002_1.jpg http://i1164.photobucket.com/albums/...0pad%20001.jpg http://i1164.photobucket.com/albums/...g%20%20003.jpg http://i1164.photobucket.com/albums/...20%20002_1.jpg |
Re: CE 060XXX TO318 9654 block . . .
That is a restamp without a doubt. The CE block assembly code is located on the starter pad and this one is T089 as seen in the pic. Aug 1969 is when it was assembled and the block was cast July 9 1969. make sure you check the bore since the 854 block was used for the 402 vs 396 in 70. Some late 69 854 blocks were bored to 396 and in 70 they received the C proceeding the engine suffix code indicating that they were the 2nd design 400 CID engine (402), pic attached of the note from a parts manual about the pistons.
https://www.yenko.net/ubbthreads/pics...iston_info.jpg |
Re: CE 060XXX TO318 9654 block . . .
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: SS69chevelle</div><div class="ubbcode-body">Some late 69 854 blocks were bored to 396 and in 70 they received the C proceeding the engine suffix code indicating that they were the 2nd design 400 CID engine (402), pic attached of the note from a parts manual about the pistons.
</div></div>The "C" prefix hit the 69 Camaros for August 69 bodies. Any "C" prefix is a 402. My born with motor was cast on July 23, 69 and assembled July 28th for a August 22 body. http://i1164.photobucket.com/albums/...811_100301.jpg http://i1164.photobucket.com/albums/...803_143322.jpg |
Re: CE 060XXX TO318 9654 block . . .
Makes one wonder if that T0318 E(T?) was put there by the owner or dealer upon replacing with this engine? That assembly date and so forth might have been on the old engine (original) and the owner felt inclined to or believed those numbers needed to be transferred to this engine? EI is a 67 396 Camaro, ET is a 67-68 Chevelle #.
|
Re: CE 060XXX TO318 9654 block . . .
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: bbbentley</div><div class="ubbcode-body">Makes one wonder if that T0318 E(T?) was put there by the owner or dealer upon replacing with this engine? That assembly date and so forth might have been on the old engine (original) and the owner felt inclined to or believed those numbers needed to be transferred to this engine? EI is a 67 396 Camaro, ET is a 67-68 Chevelle #. </div></div>
That stamping definitely looks 'home brewed' and the theory described above makes sense. As for time from casting to assembly...while 3-4 months or less may be the norm...I have seen 69 cast #854 blocks with late June/70 assembly dates. Did we ever figure out the 4 bolt vs. 2 bolt question? wilma |
Re: CE 060XXX TO318 9654 block . . .
Good evening!
Can't get to the block for a month or two. At that point I will take pics near the oil filter housing. That should tell us what the block had, either 2 or four bolt mains. Kinda leaning towards the owner or dealer replacing the engine and thus the ET suffix coding scrawl. Thanks for the responses and help from Sgt.Hawk I'll get back .. Ted |
Re: CE 060XXX TO318 9654 block . . .
I have a virgin 854 CE short block, its a 4 bolt with all orig stampings and parts. I try and get some pics of it
|
Re: CE 060XXX TO318 9654 block . . .
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: JRSully</div><div class="ubbcode-body">I have a virgin 854 CE short block, its a 4 bolt with all orig stampings and parts. I try and get some pics of it </div></div>. X2
|
Re: CE 060XXX TO318 9654 block . . .
Good morning!!
Looks like the caps that came from this CE engine are the 2 bolt variety and are numbered 362 ... Sorry re. delay and Thanks!! Ted |
| All times are GMT. The time now is 08:47 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.