1969 Cowl Induction Spacer Z28
 

Looking for an orig Demco cowl induction spacer # 3955233 used on Z28.

Thanks,

PM or call 631-514-9765

Re: 1969 Cowl Induction Spacer Z28
 

steve - is it stamped demco somewhere on the spacer...I have several nos ones from the late 70's, just need to check this demco thingi ?

Re: 1969 Cowl Induction Spacer Z28
 

Yes

Re: 1969 Cowl Induction Spacer Z28
 

Here's what he's looking for.

Re: 1969 Cowl Induction Spacer Z28
 

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: enio45</div><div class="ubbcode-body">steve - is it stamped demco somewhere on the spacer...I have several nos ones from the late 70's, just need to check this demco thingi ? </div></div>

Eddie, some are not stamped with Demco. I believe they are 2 1/4 inches. The SS 350 spacer is larger around 2 1/2 inches.

Re: 1969 Cowl Induction Spacer Z28
 

I just recently had an unstamped one.

Re: 1969 Cowl Induction Spacer Z28
 

Hi Steve, I have a stamped one if interested?

Thanks,
Dan

Re: 1969 Cowl Induction Spacer Z28
 

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: paceme</div><div class="ubbcode-body">Eddie, some are not stamped with Demco. I believe they are 2 1/4 inches. The SS 350 spacer is larger around 2 1/2 inches. </div></div>

302cid used extension #3955233.

350cid used extension #3955232.

Re: 1969 Cowl Induction Spacer Z28
 

im a little confused on the correct height of the spacer - the one on my orig late build 69Z measures 1 3/4 total height and the height of the area above the air cleaner is 1 1/8.

soooo, where is the 2 1/4 coming from or I don't have the right stuff on my car, or there are different ones.

being a late car, my cowl air cleaner has a ridge on the bottom, similar to what has been found on the late cars.

this car is a 09C car.

thoughts?

Re: 1969 Cowl Induction Spacer Z28
 

I checked the one on my orange car and it's about two inches overall and one inch from the top of the ridge to where the flange sits. This is identical to your measurements. What you have is correct my note was incorrect (possibly for ss350).

Re: 1969 Cowl Induction Spacer Z28
 

ok, ill get to the warehouse tomorrow and look at the nos ones I have

Re: 1969 Cowl Induction Spacer Z28
 

steve, I have an nos one without the demco stamping.....not sure what the price is, but let me know if this is of interest and I can figure it out. also have several nos flanges if needed

Re: 1969 Cowl Induction Spacer Z28
 

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: MosportGreen66</div><div class="ubbcode-body">Hi Steve, I have a stamped one if interested?

Thanks,
Dan </div></div>

Dan I attached two pictures the first shows the overal height of the spacer at 1 3/4 &quot; inches, and the second is the measurment of the actual spacer (top of air cleaner to flange) of 1 1/8&quot; inches. Notice the Demco stamp to the right of the ruler.

Re: 1969 Cowl Induction Spacer Z28
 

Maybe you could find the &quot;Macro&quot; setting and post a pic of the &quot;Demco&quot;.

Re: 1969 Cowl Induction Spacer Z28
 

Demco spacer purchased. Thanks SYC member, Bob.

Re: 1969 Cowl Induction Spacer Z28
 

great steve, sorry for the slow response

Re: 1969 Cowl Induction Spacer Z28
 

How much?

Thanks,
Dan

Re: 1969 Cowl Induction Spacer Z28
 

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: MosportGreen66</div><div class="ubbcode-body">How much?

Thanks,
Dan </div></div>

I paid $200

Re: 1969 Cowl Induction Spacer Z28
 

Great value all around!

Nice chatting with you Steve and good luck.

Dan

Re: 1969 Cowl Induction Spacer Z28
 

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: MosportGreen66</div><div class="ubbcode-body">Great value all around!

Nice chatting with you Steve and good luck.

Dan </div></div>
Thanks Dan, see you soon at MCACN...