68 L78 heater hose

**Glenn L78** · #1 10-30-2012, 05:59 PM

What would be correct heater hoses? the one marked GM or ribbed? also placement of CH tag on booster, Thanks

**SS427** · #2 10-30-2012, 11:52 PM

If you look to the right side of the photo you can see the CH tag hanging on the check valve outlet. The rubber vacuum line holds it tight against the valve. Hard to see the tag due to the flash.

As far as the heater hoses go, when I restored the 68 Yenko I researched this quite heavily and determined the lower hose (to the water pump) had the GM stamp and both were ribbed. Hope this helps.

**Glenn L78** · #3 10-31-2012, 12:38 AM

Thanks Rick, looking forward to meeting u at MCACN

**SS427** · #4 11-01-2012, 01:09 PM

Glenn, looking forward to it. Look us up in the Yenko Tribute display as we will not have a booth this year, in part so that we could concentrate on helping Brian and also due to not wanting to rush other projects just to get them there. We will have the 68 Yenko Camaro there on display.

The Following User Says Thank You to SS427 For This Useful Post:
purple panther (08-20-2019)