|
|
|
|||||||
| Register | Album Gallery | Thread Gallery | FAQ | Community | Calendar | Become a Paid Member | Today's Posts | Search |
|
|
|
Thread Tools | Display Modes |
|
#1
12-30-2019, 02:25 PM
|
||||
|
||||
Proper plating for coil bracket
I'm looking to restore my ignition coil bracket
and hardware. Would anyone know what is the correct factory plating on it and the hardware? I've been told by some it maybe a dull zinc plating or possibly a galvanized finish on the bracket--any experts out there? Also need proper finish on the mounting bolts. This is what I have to start with (see photo). Thanks in advance--- Sal
__________________
I currently own a 1969 Camaro SS350. Although the original drivetrain is long gone, this 4/speed car has a March '69 HC coded block with #041 heads. The transmission is an M20 Muncie #660 case and the rearend is a BS coded 12 bolt posi. Built in Van Nuys. 
|
|
#2
12-30-2019, 02:53 PM
|
||||
|
||||
|
IMO, they were made from galvanized sheet stock like the brake backing plates. It is acceptable, but not "correct" ? to plate in clear cad or zinc.
Mike
|
|
#4
12-30-2019, 10:32 PM
|
||||
|
||||
|
Thanks for your comments guys--- that coil
bracket above looks like hot dipped galvanized. Does anyone on sYc know of a shop that does this correct finish? Thanks for your help. Sal
__________________
I currently own a 1969 Camaro SS350. Although the original drivetrain is long gone, this 4/speed car has a March '69 HC coded block with #041 heads. The transmission is an M20 Muncie #660 case and the rearend is a BS coded 12 bolt posi. Built in Van Nuys.
|
|
#5
12-31-2019, 03:45 AM
|
||||
|
||||
|
http://www.tfcplating.com/
Jim (*PS I use the above for Zinc plating only & have no experiance with their TIN process)
__________________
69 Los Z11 68 SS/RS 396/325 68 Los Z28 
|
|
|
|
Linear Mode
