Musclecar Photographs mrays

[mrays]

I'm no Mopar expert, but I believe it also depends on the plant the car was built at. One of the plants didn't attach the tag to the fender until after the car was painted so the tag was mostly void of paint with two unpainted screws. I believe it was hung inside the car while going through the painting process so there would be some overspray on it. The other plant attached the tag with one screw before paint was applied. Typically the screw closest to the front of the car is painted unless it is a two tag car. With a two tag car typically the center screw holds down both tags and the screws on the ends are unpainted. Like mentioned above, I believe the tag or tags were bent up until the painting process was completed. Then they were screwed down with an unpainted screw.