rear pinion flange oil slingers

**SS427** · #1 02-08-2006, 10:56 PM

Wanted; mint NOS oil slinger for the rear yoke on a 70 (or other years) 454 12 bolt. Others may fit as well. This is the bare steel, round cap that attaches to the rear of the pinion flange and covers the rear seal so that when oil leaks from the seal it does not spray all over the underpan. Need 2 very badly. Appreciate any leads. TIA
Rick

**k92** · #2 02-09-2006, 12:26 AM

Rick do you have any pictures of this? Would one come with a total rearend rebuild kit?

**SS427** · #3 02-09-2006, 12:51 AM

Rob,
Unfortunately not with me. I will look tonight and see if I have them on my LS-6 restoration CD which I believe they are.
Rick

**k92** · #4 02-09-2006, 01:05 AM

Rick, I now know what you are talking about. If I remember right mine was attached to the yoke when I took it off. I did actually know that they came apart from the yoke? Hope that you find one.

Keith Tedford · #5 02-09-2006, 02:24 AM

The GM parts catalogue shows them as a single part number, 3996118, if they are even available from them yet.

**SS427** · #6 02-09-2006, 05:54 AM

Here is a photo of what I need. It is behind the oinion flange. Keith, I will check with GM. Thanks for the number.
Rick

Bruce · #7 02-09-2006, 07:11 AM

Just checked parts voice several dealers show up but all were over 30 days without updates.
www.partsvoice.com

**SS427** · #8 02-09-2006, 04:34 PM

Thanks Bruce, I will check that out.
Rick