Wiring harness tape

[ALLZS]

my rear tail light harness on my 69 camaro is fine the tape is dried out what is the correct style tape to use and a source to get it from

[jl8z28]

I have some that is pretty close i used it on my cars ill see if i can find some i have left

[ALLZS]

ok or let me know where i can find it thanks

[169indy]

AMK
Plastic
3/4" Part Number B-11667
1" Part Number B-11666
Friction
3/4" Part Number B-11669

[ALLZS]

here is a sample of the original tape on the harness its vinyl on the out side and mesh on the inside

[jl8z28]

The tape that was on my cars was a 2 side sticky tape i went through legends and they said it was correct

[ALLZS]

do you have a picture of the tape you used thanks

[169indy]

ALLZS, Wow look at this rear harness on Facebook.
Link
https://www.facebook.com/photo?fbid=...71228623122319

Your Sample has, as does this removed rear the Plastic tape AND the Mesh. I reworked my 69 Pacers rear years ago and do not recall the Mesh. I know of no exact-reproduction tape out there at this time. I will peruse the 3M web site, It Certainly WAS not adhesive coated on BOTH sides.

[169indy]

You could use this with the AMK to produce your own Tapes:

https://www.amazon.com/MILEQEE-Unive...3b75cdfd527c42

[rlw68]

I used this 1" wide cloth tape from American Autowire

https://americanautowire.com/product...tape-pm485-007