1969 Judge 4 speed

[tjs44]

The price for the done car with the original engine is 43K.I have a WS block stroker engine going together right now,might be on Joe Shermans dyno next week.It could be avail for it.Also have a one of only a handfull Alu block tunnel port RA V engine avail for the car.Anyone interested can email me at [email protected].
The car is sitting waiting for a engine to be put in.After it is in it will go to the shop for headliner and package tray.Trying to sell before I have to title and pay tax on it which will only raise the price.Tom

[tjs44]

original engine is in.The alu V motor was sold today.WS motor still avail.

[Xplantdad]

Wow...it's looking great!

[92646]

Tom I am a little concerned if this is your idea of slowing down. The car looks great, it is a little late now but what is the stroker motor?
Mark Sheppard

[tjs44]

When I bought the car it came with a 69 WS block.I did some checking and found out it is a restamp block.69 RA III blocks are nothing special.Just another 2 bolt block but has a diff code depending if a auto or 4 speed.Anyway,I built it from the block up to look like a RA III engine.The crank is a Ohio crank forged 4.21 stroke unit.Forged H beam rods and Ross 4.155 bore forged dished pistons for 9.5 CR.The heads are correct 69 RA III #48 heads.The cam is a compcams hyd roller with comp lifters.The heads were done by Joe Sherman racing.All new valves springs,retainers etc.H&S full roller rockers.I had nothing to build the engine so had to buy every nut and bolt to build it.It will be a very nice 455 stock looking 400 RA III driver.

[tjs44]

trans,driveshaft are in.Working to finish up underside to get on the radiator-shroud.Have to work a bunch at a sports show next week so might not be till the week after for the engine startup.Cant wait to actually drive it.Tom

[tjs44]

TTT,the car is now running.In the interior shop for headliner and package tray.Current pics in pontiac section.Trying to sell before I have to reg and and pay sales tax which will raise the price.Tom

[tjs44]

Pretty much done.Just have a couple elect. gremlins to figure out.Car is priced at $43500 if I dont have to reg.Tom

[jbsides]

Tom,

Are you bringing it to the Seal Beach Car Show tomorrow morning? I would love to see it there along with the impressive line of goats that paticipate every year down by the pier. It would be the hit of the show!
I also have a pal in San Diego who is looking for one, so if you don't bring it I'll ask him how serious he is and set something up if you don't sell it too quickly.
IMO, you should roll on the YOM DMV process for a set of black plates. It would only cost you $141, but the downside is it can take up to six months to get 'em.

JB

[tjs44]

It is not reg so im not driving it.I will be there with my 63 421 Lemans and 63 421 Cat.Look me up.Will be on the north side of the pier on Ocean.If you want to come over and see it let me know,only a few min from there.Tom