Wiring harness tape

**ALLZS** · #1 09-13-2024, 12:43 PM

my rear tail light harness on my 69 camaro is fine the tape is dried out what is the correct style tape to use and a source to get it from

**jl8z28** · #2 09-13-2024, 12:59 PM

I have some that is pretty close i used it on my cars ill see if i can find some i have left

**ALLZS** · #3 09-13-2024, 05:11 PM

ok or let me know where i can find it thanks

**169indy** · #4 09-13-2024, 05:22 PM

AMK
Plastic
3/4" Part Number B-11667
1" Part Number B-11666
Friction
3/4" Part Number B-11669

**ALLZS** · #5 Yesterday, 02:11 PM

here is a sample of the original tape on the harness its vinyl on the out side and mesh on the inside

**jl8z28** · #6 Yesterday, 09:57 PM

The tape that was on my cars was a 2 side sticky tape i went through legends and they said it was correct

**ALLZS** · #7 Today, 12:30 PM

do you have a picture of the tape you used thanks

**169indy** · #8 Today, 08:54 PM

ALLZS, Wow look at this rear harness on Facebook.
Link
https://www.facebook.com/photo?fbid=...71228623122319

Your Sample has, as does this removed rear the Plastic tape AND the Mesh. I reworked my 69 Pacers rear years ago and do not recall the Mesh. I know of no exact-reproduction tape out there at this time. I will peruse the 3M web site, It Certainly WAS not adhesive coated on BOTH sides.

**169indy** · #9 Today, 08:58 PM

You could use this with the AMK to produce your own Tapes:

https://www.amazon.com/MILEQEE-Unive...3b75cdfd527c42

The Following 5 Users Say Thank You to 169indy For This Useful Post:
Blown32 (Yesterday), dykstra (Today), Jims69z28 (Yesterday), ruralrte66 (Today), X66 714 (09-13-2024)