Parts taken off 69 L78 to get it running

[daveg]

Found this in carb.
Power valves and accelerator pump were STIFF.
Ran but a little sick.
This is how it was when shee bought it.
Test drive was a little shaky.


All good now.
Went down slightly from factory specs on power valves and jets.
All it gets is 110 racing gas and it likes it.

Plug wires are repops.
Working on a NOS set but not complete yet.

Dist not changed yet and smog hoses are 71 in pic.
69 hoses were not on yet.

[napa68]

Originally Posted by daveg

Fuel pump off it.
Works but is quite stiff.
Who can rebuild it without making it pretty?

Fred Ballard
661-251-2362

[Hawkeye]

Fred Ballard
[email protected]

He will rebuild and not restore.
This has been a good reminder that I need mine rebuilt as well.

Cheers,
Marty

[napa68]

Originally Posted by Hawkeye

Fred Ballard
[email protected]

He will rebuild and not restore.
This has been a good reminder that I need mine rebuilt as well.

Cheers,
Marty

Originally Posted by napa68

Fred Ballard
661-251-2362

Stereo

[daveg]

Stereo is good.
Thanks and it will head his way Monday.

Was wondering what to do with it.
Did not dare use it as stiff as it is.
Accelerator pump and power valves were very stiff also.

THANKS again
Dave

[daveg]

Just talked to Fred.

All handled

THANKS

[daveg]

Before pics are here and will post after pics when back.

"Survivor" service is $275.00 with $30.00 return shipping for any interested.

Fred said the return time is quicker on this type rebuild without plating.
Said it should look pretty much the same.

"R" distributor cap cleaned up nice.
Aircraft stripper made short work of the overspray.

Factory points should have the old Delce Remy on top of arm?
Condenser same on end?
May as well get them too.

Info says these points are the stiffer spring ones for HP motors?