#1
|
|||
|
|||
B28 Vacuum advance can
Looking for a new/nos “B28” vacuum advance can. These were listed under several different part numbers, most commonly known is the VC1810.
Pic for reference. Thanks! Last edited by Gonzo1717; 07-09-2022 at 03:50 PM. Reason: . |
#2
|
||||
|
||||
If you are looking for a correct specification can, use this......
https://www.corvettecentral.com/c2-6...5%26count%3d17 |
#3
|
|||
|
|||
This can is fully deployed at 8hg like the B28?
|
#4
|
||||
|
||||
Yes, I had checked it before installing. I'll add to that, I checked on the part number located on the box (as CC is buying it from someone else) and it was available from Rock Auto. I ordered a couple more just to have as I tend to work on these cars. Those did NOT deploy at 8". Just the one from CC
Tim |
#5
|
|||
|
|||
Tim, thank you for the info. I went ahead and ordered one. I ordered a WVE 4V1053 from RockAuto, which they lost as a replacement for a B28 and it does not fully deploy until 13hg.
What part number did you purchase from RockAuto? |
#6
|
||||
|
||||
Cannot remember.....
|
#7
|
|||
|
|||
I have a B28 still in box I grabbed before they became extinct if your still looking
__________________
69 RS/Z 302 VE3 Daytona 69 Chevelle SS 396 375 69 T/A clone LS6/6 speed 90 Formula 350 |
#8
|
|||
|
|||
Here's a couple good reads on the Vac can subject with cross references if you were not aware:
https://www.crankshaftcoalition.com/...ance_Specs.pdf https://www.corvetteforum.com/forums...post1590683061
__________________
70Z28 04B Norwood Forest Green-white Stripes Black DeLuxe Interior Owned since 1978 - First Car |
#9
|
|||
|
|||
PM sent
|
#10
|
||||
|
||||
Info from WELLS
__________________
69 Los Z11 68 SS/RS 396/325 68 Los Z28 |
Thread Tools | |
Display Modes | |
|
|