Dedicated to the Promotion and Preservation of American Muscle Cars, Dealer built Supercars and COPO cars. |
|
|||||||
| Register | Album Gallery | Thread Gallery | FAQ | Members List | Calendar | Become a Paid Member | Search | Today's Posts | Mark Forums Read |
|
|
|
Thread Tools | Display Modes |
|
|
|
#1
02-14-2013, 11:00 PM
|
|||
|
|||
Re: Body mount bolts and washers
These are out of a southern 68 nova. Are you talking about the front thick washer or spacer?
 
__________________
Looking for the next project. 
|
|
#2
02-14-2013, 11:25 PM
|
|||
|
|||
|
Re: Body mount bolts and washers
My originals are right at .125" or 1/8" thick.
The replacements I got with the poly bushings are barely thinner at .118". I also have some from a 70 Nova, and they are just barely thicker than my originals from the 69 Camaro. They too are pitted. I can live with the difference, but the replacments appear to be simple hardware grade, and they distort too easily. Would like a good grade 8 washer. 5/8 hole, about 2 and 7/16 outside diameter and close to 3/16 inch thick.
__________________
Don't believe everything you read on the internet ... Ben Franklin
|
|
#3
02-14-2013, 11:42 PM
|
|||
|
|||
|
Re: Body mount bolts and washers
Not sure if you have a machine shop close by. They can always take a solid piece of steel turn it down on a lathe, drill the 5/8 hole, and cut them to the correct thickness for you. Just an idea.
__________________
Looking for the next project.
|
|
#4
02-21-2013, 12:17 AM
|
|||
|
|||
|
Re: Body mount bolts and washers
jasonL78,
What are the head markings on your subframe bolts?
__________________
67 Z/28 Butternut Yellow 69 Z/28 Rally Green 69 Z11 Pace Car (2) 69 RS/Z28 Lemans Blue / Olympic Gold 2010 2SS RS Aqua Blue 68 Z/28 Lemans Blue C7 Corvette 68 SS Lemans Blue 69 RS/Z28 Maroon JL8 66 Corvette Ermine White L75
|
|
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
