Dedicated to the Promotion and Preservation of American Muscle Cars, Dealer built Supercars and COPO cars. |
|
|||||||
| Register | Album Gallery | Thread Gallery | FAQ | Members List | Calendar | Become a Paid Member | Search | Today's Posts | Mark Forums Read |
|
|
|
Thread Tools | Display Modes |
|
#1
11-14-2004, 04:15 AM
|
|||
|
|||
F.A.S.T car runing 11.00
I see that Greg Gessler GS buick at Englishtown, NJ in first round ran
11.08 at 127 mph  and that's on the polyglass GT tires I did not think this would be possible on polyglass tires  
|
|
#2
11-14-2004, 04:38 PM
|
|||
|
|||
|
Re: F.A.S.T car runing 11.00
He backed it up with an 11.02 at 127. It's all in the combination and what he does inside those stock castings.
Polyglas tires hook well, you just have to have the car set up for it and drive it out of the hole. Tougher on a stick shift.
__________________
1966 442- L69 4 speed 1968 Ramrod W31- bought new 1968 442 W30-real thing,but a little different 1975 Delta Royale convertible-
|
|
#3
11-14-2004, 05:02 PM
|
|||
|
|||
|
Re: F.A.S.T car runing 11.00
Norm, like you, I thought it was improbable to turn those kinds of ET's on polyglas repro tires until I saw it for myself. Average 60' times for the front runners are usually low 1.80's. Gessler, if my memory serves correct, occasionally dips to high 1.70's. I've ran a hemi challenger with these guys for two years now. When I started, a 2.15 was a good 60' for me, at the last race of the season this year, I was hitting low 1.90's with a 4spd car that out-weighed Dudek's hemi challenger by 300lbs. or so. It's done with skill, spring rate set-ups and a little weight distribution, and it's a load of fun too.
Steve H.
__________________
Steve H. industrial art collector
|
|
#4
11-14-2004, 05:39 PM
|
|||
|
|||
|
Re: F.A.S.T car runing 11.00
From the Year One site...
Gessler: 11.02's [two of them] @ 127.04 mph! Dudek: 11.03....ready for this? 132.22 mph!! Cannon: 11.57 @ 122.96 mph Wendling 11.76 @ 118.75 mph Cannon's run was the fastest for a *small block* in his Mopar, and Wendling's car is a Firebird...and our course Dudek's Hemi Chally and Gessler's Buick! WOW... 
|
|
#5
11-14-2004, 07:16 PM
|
|||
|
|||
|
Re: F.A.S.T car runing 11.00
Rob does Dudek have a roll bar or any other forms of safety equiptment in his car? Going that fast has to scare the $hit out of the driver!
__________________
Frank Magallon
|
|
#7
11-15-2004, 01:52 AM
|
|||
|
|||
|
Re: F.A.S.T car runing 11.00
Yes & no, respectively.
NHRA recently dropped it's bar limit to 11.50 (like IHRA) for *stock* cars, so the F.A.S.T. cars have been sneakin' by because of that...but, since some of the guys are beatin' the 11.50 mark pretty handily, they've had to install bars. The ones I've seen are VERY discreet, and you've gotta take a hard look to see 'em. As for "timing management", that's a big, BIG *no no*...
|
|
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
