Dedicated to the Promotion and Preservation of American Muscle Cars, Dealer built Supercars and COPO cars. |
|
|
|
#1
03-05-2002, 02:09 AM
|
|||
|
|||
Re: Rear Leaf Springs
I use the POR exhaust manifold paint, its a bit lighter, but You can probably tint it with Regular Black POR. This works great for drivers.
__________________
Click to visit the Nickey Performance Facebook--> 
|
|
#2
03-05-2002, 03:56 AM
|
|||
|
|||
|
Re: Rear Leaf Springs
These were taken apart, wire brushed and a rust inhibitor was applied then shot with rattle can steering gearbox paint from NPD. They were too blue so I dusted them with light coats of some cast iron gray.
http://www.chevelles.com/showroom/rear5.jpg The POR may be a tougher finish though. [Edited by DjD (03-04-2002 at 09:53 PM).] [Edited by DjD (03-04-2002 at 09:56 PM).]
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
