1969 Camaro copo on ebay

[bkhpah]

Sounds like a good restoration project. If the car was done well it would and should bring the right money. I have yet to see a real High-Performance by Scunzio COPO. The build date on the car seems likley it would not be the first COPO in that area, but who really knows. As for the color it is very rare. It would be a dynamic package with the rally wheels and D80. An enduro bumper would really set it off in that color with the silver grill. Overall I would think it will make someone a very rare and attractive Camaro. I am looking through my old magazines, but have yet to make the DEB connection. The upside on this car is very good. Who will pull the trigger on this one?..BKH

[Edited by bkhpah (01-29-2002 at 12:26 PM).]

[Kurt S]

Too bad on the roof, that's a pain to fix.
Is the short spoiler original? Real late if so.
Original distributor? That would help show that its the original top end of the engine.

[JoeC]

Are the rear end tubes welded to the center section and are the rear spring brackets re-welded to the axle tube? A serious drag car may have had some re-welding done as it didn't take many runs with slicks to brake the factory welds.

[Edited by JoeC (01-29-2002 at 01:46 PM).]

[Rat_Pack]

Kurt, there is an 03B car with the short spoiler out there that is supposed to be original. Did I send you pics? This car does not sound as rough as it looks in the pictures. I agree with Brian, Burgandy with VE3 bumper up front would look awesome with a silver grill...............RatPack............

[whitetop]

and Cragar SS wheels..........

[Warren Malkin]

Didn't notice the rear having any extra welds, but when I go back, I have a laundry list of things still to check.
I failed to mention before that the drivers rear frame rail had the plate welded to it for the tailpipe hanger. Also had the 3/8ths fuel line. I checked one front rotor, and it was the two piece design, hub bolted to the rotor. Front of frame had tow tabs attached. I will check front of frame to see if it has the hole for front spoiler, center brace screw. I didn't check out the front sheet metal to see if it is original to the car. Not sure if it originally came with a rear antenna. The pass door wouldn't open, as it was hanging up on the pass fender. I was going to see if there was a plug where the antenna lead goes through between the door hinges.
I will check out more on the engine, and the car in general. I'll see if he has the air cleaner asm. I was on limited time checking out the car, as Bill was 45 minutes late showing up.
I will call him tomorrow and see if I can look at it again tomorrow night.
I will post my findings. Warren

[COPO PETE]

If it's a spoiler car, it wont have the rear antenna.
Peter