Dedicated to the Promotion and Preservation of American Muscle Cars, Dealer built Supercars and COPO cars. |
|
#10
02-26-2026, 12:51 AM
|
|||
|
|||
Guys, I can’t thank you enough for your help.
So here is my dilemma, I’m looking at the CRG site under 67 Camaro pulley configurations and according to that I have the correct pulleys for L78 w/smog. 3863108 Crank pulley 3906656 Water pump pulley 3880800 Smog pulley The crank and water pump pulleys are 2 groove, with the smog pump mounted it appears it needs 3 groove pulleys on the crank and water pump in order to work? What as I missing here? Also, when I bolt up the bracket that would tighten the belt, assembly manual shows it mounts from water pump stud to the pump, well when it’s mounted like that the Alt belt hits the bracket? The bracket I have (67 only I believe) looks to be correct according to the manual. I’ve dug around quite a bit looking for info and pics for this setup and there is not much that I can find. 68 /69 much more info out there….hmmph….
__________________
Kurt 64 Chevelle 300 Deluxe 21K original miles 64 Corvette 68 Camaro 68 Camaro RS 68 Camaro SS 69 Camaro Daytona Yellow RS/SS L78 69 Camaro Daytona Yellow Z-28 69 Camaro RS 70 Chevelle SS 396 4-speed 1998 Camaro 2001 Z-28 Camaro 2001 SS SLP Camaro 2006 Corvette 2015 COPO Camaro Ser#003 
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode