The BMW 507 Ultimate Build Thread!!!

[A12pilot]

Good eye, Steve-a-Reeno!

The problem is, left and right covers are not the same. One has a breather port that sticks up 2” or so. The other is for the PCV and flush. I used both flush mounted covers and therefore, only option when swapping L to R is to have the hole offset. I could have relocated the hole and baffle, but that would take time away from building the frame and all the other junk and stuff like that!

Make sense? If so, let me know. I forgot what I was talking about.

Cheers
Dave

[njsteve]

No Problemo (or should I say Nein Zundfolgo?)

Just doin' my job. I figured you missed having me kvetching over your decisions like back in 2021.

[bashton]

Originally Posted by A12pilot

Good eye, Steve-a-Reeno!

The problem is, left and right covers are not the same. One has a breather port that sticks up 2” or so. The other is for the PCV and flush. I used both flush mounted covers and therefore, only option when swapping L to R is to have the hole offset. I could have relocated the hole and baffle, but that would take time away from building the frame and all the other junk and stuff like that!

Make sense? If so, let me know. I forgot what I was talking about.

Cheers
Dave

Geeez....guy acts like he knows what he's doing!

Bashton

[njsteve]

Dave you do realize you're going to have to dress up like Elvis when you debut this car. That would be the perfect icing on the reproduction cake.

[mssl72]

Man Dave!! That wheel center is the s#%t!!! Be careful you don't loose them. That non-stick coating may be a problem!