Dedicated to the Promotion and Preservation of American Muscle Cars, Dealer built Supercars and COPO cars. |
|
|||||||
| Register | Album Gallery | Thread Gallery | FAQ | Members List | Calendar | Become a Paid Member | Search | Today's Posts | Mark Forums Read |
|
|
|
Thread Tools | Display Modes |
|
#1
11-05-2020, 04:01 AM
|
||||
|
||||
Painting underside of Cowl Hood 76 Yellow
Can anyone tell me how the underside of a cowl hood was painted from the factory? For instance, does the yellow only get sprayed down along the edges on the side of the hood, or did they paint the leading edges on the underside as well?
Also, how is the back edge of the hood finished? Somehow I am picturing the back edges being black on the underside with a black flapper door frame but would think some overspray got the underside as the cart went by with the front end parts laid out? I read there was a one-inch gap between the side panels but I'm unsure about the back edge of the cowl and how it was sprayed on the cart? I'd really like to see a picture of an original 76 cowl hood opened up if anybody has one? I'm looking to do mine as a factory appearing hood. Any help is appreciated. 
__________________
I like solid lifter cars, big cams and cars w/ 3 pedals in them. 
Last edited by NorCam; 11-05-2020 at 04:27 AM. 
|
|
#2
11-05-2020, 10:28 AM
|
||||
|
||||
|
There's some good pictures here...Joe
http://www.camaros.org/forum/index.p...ic=14708.0;all More of other information since you'll be there soon http://www.camaros.org/forum/index.php?topic=14029.0
__________________
1968 Z/28 Corvette Bronze. Black Hounds Tooth. 02E Los Angeles born 3/13/1968 pnt OO 1969 SS396 Yellow/Yellow 08E Norwood born 8/28/1969 pnt 76E 1970 'cuda Moulin Rouge, 440-6, 4 speed Last edited by X66 714; 11-05-2020 at 10:31 AM.
|
| The Following User Says Thank You to X66 714 For This Useful Post: | ||
NorCam (11-05-2020) | ||
|
#3
11-05-2020, 10:39 AM
|
||||
|
||||
|
__________________
1968 Z/28 Corvette Bronze. Black Hounds Tooth. 02E Los Angeles born 3/13/1968 pnt OO 1969 SS396 Yellow/Yellow 08E Norwood born 8/28/1969 pnt 76E 1970 'cuda Moulin Rouge, 440-6, 4 speed
|
| The Following User Says Thank You to X66 714 For This Useful Post: | ||
NorCam (11-05-2020) | ||
|
#4
11-05-2020, 01:30 PM
|
||||
|
||||
|
Thanks again Joe.
Those pictures showing the leading edge of David Beem's hood should help out a lot. I'd still like to know if there was any overspray along the back edge of the cowl, or more specifically around the opening for the flapper door frame.
__________________
I like solid lifter cars, big cams and cars w/ 3 pedals in them.
|
|
#5
11-06-2020, 06:37 PM
|
||||
|
||||
|
There is a mist of yellow on the back underside of the hood... this being the case I believe that the rear of the hood was painted yellow...
I have a shot of the rear lip and it shows full yellow coverage. -FWIW if you set up the front end panels on a buck with a 1-2" gap between hood fenders valences and then shoot them you will get coverage which should mimic Chevrolet assembly Norwood.  As far as body coverage... Resist the temptation to turn the gun nozzle pointing UP... they were on reciprocating rails at Fisher Norwood and the gun more or less stayed horizontal which is why the lower rockers are light, the under lips of the quarters are light and the lower rear valence lip is light...  Not the best photo however you can see the light coverage on the lower lip of the tail pan, 
__________________
~JAG~ NCRS#65120 68 GTO HO 4 spd Alpine Blue /Parchment 2 owner car #21783 71 Corvette LT1 45k miles Orig paint - Brandshatch Green - National Top Flight - last known 71 LT1 built. 71 Corvette LT1 42k miles Original paint - Black - black leather - only black LT1 known to exist. NUMEROUS Lemans blue Camaros, Monza Red and Daytona Yellow Corvettes & a Chevelle or two... Survivors, restored cars, & other photos https://picasaweb.google.com/lh/myphotos
|
|
#6
11-07-2020, 01:23 PM
|
||||
|
||||
|
Thanks for the info and for also chiming in here James. I think we now have a plan for how we're going to paint the hood. Shouldn't be long now.
__________________
I like solid lifter cars, big cams and cars w/ 3 pedals in them.
|
|
#7
11-07-2020, 01:59 PM
|
||||
|
||||
|
Don't know if this will help you at all. It's a shot of a Z/28 right from the factory to Hot Rod for an article. It's a flat hood but I would think it wouldn't make a difference as wouldn't they paint them the same way they did a cowl hood? I know - B & W. So maybe not too much help. The color is Hugger Orange BTW
 
|
| The Following User Says Thank You to Lee Stewart For This Useful Post: | ||
NorCam (11-07-2020) | ||
|
#8
11-07-2020, 03:31 PM
|
||||
|
||||
|
Lots of good detail there including a great picture of the air filter element....Joe
__________________
1968 Z/28 Corvette Bronze. Black Hounds Tooth. 02E Los Angeles born 3/13/1968 pnt OO 1969 SS396 Yellow/Yellow 08E Norwood born 8/28/1969 pnt 76E 1970 'cuda Moulin Rouge, 440-6, 4 speed
|
|
#9
11-07-2020, 04:14 PM
|
||||
|
||||
|
Quote:
https://www.hotrod.com/articles/vint...et-camaro-z28/
|
|
#10
11-07-2020, 06:56 PM
|
|||
|
|||
|
This is from Stefanos yellow Z/28 project many years back. Had some excellent pics of original features.
__________________
Learning more and more about less and less...
|
|
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
