Any idea what this went in originally?

[bbbentley]

Originally Posted by big gear head

How do you get the stick out of one of these?

I slide a thin object down the lh side (driver)of the handle. Last time I used a pairing knife out of the kitchen drawer ( wife not too happy, but what can I say?). Try to go straight down the middle of that lh slot between the handle and thin stainless piece. You may want to use a lubricant (WD-40 or ?) & you may have to wiggle the blade or feeler or whatever you use back and forth. The blade will only go about 3/4 in. down and stop. Turn the shifter over upside down or to where you can take a long punch and strike the bottom of the shifter handle driving it out the top. A vice is handy also.