Next Years Power Tour Car

[kwhizz]

Been getting a lot of little stuff finished........Made an adaptor for the Dakota Digital Oil pressure sender and got the wires in the car....



Got the steering column and Lokar shift linkage intsalled





Also got the Dakota Gear selector module installed





I also got the needed wires into the car......Cleaned up the engine a little.....moved the mess inside for Dave....






I also intalled the heat shrink clamps on the heater hoses....another thing off the list..





Cooling fan next week along with radiator hoses....almost ready to start it.....

[Xplantdad]

Very cool! [img]<<GRAEMLIN_URL>>/headbang.gif[/img] [img]<<GRAEMLIN_URL>>/headbang.gif[/img] [img]<<GRAEMLIN_URL>>/headbang.gif[/img]

[napa68]

If you care to, a little thinner takes off the printing on the clamps.

The parts you purchased from Ride Tech, is that a stock height coil over or is it lowered Ken?

looks good!

Tim

[kwhizz]

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: napa68</div><div class="ubbcode-body">If you care to, a little thinner takes off the printing on the clamps.

The parts you purchased from Ride Tech, is that a stock height coil over or is it lowered Ken?

looks good!

Tim </div></div>


I had two batches of the clamps....the thinner took off the white printing on most of them.....the ones with green printing were stubborn and wouldn't come off........The coil overs are adjustable and I really haven't messedwith them yet!!
Dave is coming over next Saturday to get started on the wiring..........

Ken