37 Ford LS2 Continuation thread

[RPOLS3]

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Belair62</div><div class="ubbcode-body">Mufflers nice and level too !!! </div></div>

Yes they are!

Amazing amount of work being done in a short time period. Good luck and have fun Ken.

Jake

[Xplantdad]

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: RPOLS3</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Belair62</div><div class="ubbcode-body">Mufflers nice and level too !!! </div></div>

Yes they are!

Amazing amount of work being done in a short time period. Good luck and have fun Ken.

Jake </div></div>

Agreed! Drive safe my friend!

[kwhizz]

Two days till Power Tour.............Started off the day getting the dash medallion machined and installed....





I also decided that to make a dash to floor console would make the area seem too confined.........so.....Here's a sequence of build pic's......the sides will be installed tomorrow, get wrapped in leather and installed..........


















Ken

[kwhizz]

Dave came over and finished up all the wiring for the radio etc......He also got the radio working.......just need to get a adaptor for my Sirius receiver....










I also got the new rear wheels installed with more tire clearance........

One more day...................

Ken

[bashton]

Car looks awesome, Ken.

This is the first chance I have had in a while to catch up on your build.

We are leaving in the a.m. (the Horney passed inspection once again!) and we will see you and the crew Saturday. Don't forget to pack your MCACN shirts! lol

Bashton
MCACN Managing Member

[ORIGLS6]

Freakin Amazing! Can't wait to see it in person. Just keep Dr. Lilly-ard away from it. He'll screw up something.

And for God's sake DON'T let him program your GPS!!!!!!

[SS427]

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: kwhizz</div><div class="ubbcode-body"> Two days till Power Tour.............Started off the day getting the dash medallion machined and installed....


</div></div>

Spoiled Brat!!!!

[kwhizz]

Last Day.................Started out by figuring out how to build a rear support on the radio module.....got that done and welded the sides on.........Did some finishing....then off to the upholstry shop........picked it up and installed it......Pic's to follow with time frame............

10:30am





1:00





3:30 pm at Vintage Stitch getting covered



6:30 pm







Ken

[ORIGLS6]

And after a late night of packing and final clean-up, ....... it's OFF TO NEWTON to enjoy the fruits of his labor!!!!

Yippee! We're off to see the Whizzer!!! It ain't Kansas Toto, ..... it's IOWA! See ya Saturday. [img]<<GRAEMLIN_URL>>/biggthumpup.gif[/img] [img]<<GRAEMLIN_URL>>/biggthumpup.gif[/img] [img]<<GRAEMLIN_URL>>/Can-I-Have-It.gif[/img]

[kwhizz]

A couple of other things happened ....As I was driving along on my way to the upholstery shop, the car quit running.....I coasted off to the side and tried to figure what went wrong.......Humm!!............3/8 of a tank of gas.........Hummm!!.....went to start it and it started right up......Humm!!....I could still hear Charley telling me to double check the fuel gauge prior to Power Tour......Gas Station right across the street....pull in and put in 15.8 gallons in a 16 gallon tank......LOL
Went and had a economy tune put in the ECM for fuel mileage on the Power Tour.....I also found out to get Sirius to work with the new radio I needed to spend some more money for a tuner and some other stuff......Dave comes over to hook everything up and they sold us the wrong stuff...........Darn!!.........
Also......The ECM controls the Radiator fan on/off and once the engine temp gets to normal, the Fan comes on and never goes off......Went to the GM dealer for a new Fan Temp Control Sensor.....put it in......same thing.........Humm!!
Now.......The one that really makes me not like this car........after getting the windshield resealed.....I checked it today and it still leaks like a sieve..........Double Darn!!
When the time presents itself......that piece of crap 1 pc windshield is coming out and I'll go back to the 2pc flat glass style...............

Ken