Orig parts finish quality

[SS427]

With regards to the cottage cheese effect, research shows that this is a process created by the heat treating. If you look at an untouched original sway bar you can actually see various shades of black mixed within the cast color. This is not paint but rather caused by the heat treat process. After many hours of trial and error, I was able to closely replicate that process but this can cost several hundred dollars on a fairly inexpensive part. Only for the hard core resto freaks in some of us.

With regards to dipping, many parts were done this way as you've both stated. They include A.I.R. brackets, alternator brackets, misc clips, I believe steering columns, power steering brackets, A/C brackets, and many other parts.

On a survivor LS-6 I am restoring, the hood appears so have been hung sideways during spraying and there are large drips running from the center towards the sides. During the restoration, I left those drips intact. The list goes on and on.