Yeah, that fuzzy, grey finish on the entire dash plastic is a nightmare for Gen 1 owners. I think the same era Ferraris have the same problem. It all turns to a sticky goo. I was able to stabilize mine by wiping it down with Prep-Sol. No one makes a reproduction paint to replicate the fuzzyness.
Down in Florida, the car would run insanely hot. We were in touch with the engineers at team viper at the time. Best advice was to unplug the A/C compressor and then activate the A/C - it turned the A/C button in to a full time dual electric fan on/off switch. That was good for 10 degree reduction...and it wasn't like the A/C did anything in an open car with no windows in Central Florida in August.
The recore should be done next week. They estimated around $695 to convert it to 3-core from a 2-core. He said the prices went way up due to the copper costs rising a lot. My previous recores with them (the 70 Cuda and Grampa's 71 Lincoln) were around $500 a few years ago.
Last edited by njsteve; 03-02-2024 at 02:09 PM.
|
03-02-2024, 12:50 PM
Threaded Mode