Bumpers were sanded back down and adhesion promoter sprayed on first followed by DP Epoxy using 401LF catalyst instead of three standard 402LF. After that, 2K primer with no additive. Once the paint in complete, the clear gets the flex agent. I'll fill in the pinholes then it'll be ready for paint!
Engine bay is buttoned I up with all brake lines hooked up for Steve-O to start the bleeding process. Wheel lip moldings installed, and up next will be the undercoating in the wells. Once the bumpers are done, the da ssd's h will be loosely placed in along with the steering column, seats, aged the remaining parts awaiting pickup!
Woohoo! Almost done!
Cheers
Dave
|
08-08-2020, 10:41 PM
Threaded Mode