Chevelle updates

[VintageMusclecar]

I *think * I've found the issue.

When I measured the hub on the HD axle, it appears I had the calipers slightly on the radius at the back of the register which showed the large reading. I re-measured this morning making sure to only measure the outer part of the register, and it does measure the same as the c-clip style axle for the `67 rear end. (It's not easy to get an accurate measurement with the wheel studs in place)

It appears I may just need to go one size larger on the wheel stud holes to allow a little wiggle room for the drum to index on the register. I'm off to the hardware store shortly to pick up a 17/32" drill bit.

Please...let it be this easy. [img]<<GRAEMLIN_URL>>/crazy.gif[/img]