|
Register | Album Gallery | Thread Gallery | FAQ | Community | Calendar | Become a Paid Member | Today's Posts | Search |
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Hurst Reverse Loc Out
Hi Guys, I would like (if possible) to install a period 1960's Hurst Reverse Loc Out lever in my 1969 Camaro. Its a Day 2 build. I do have a console with gauges that I would like to keep in place. I have an after market Hurst shifter installed. I've seen just the Loc Out Lever sold separately and love the look of them. My question is: anyone currently using an old style Hurst Loc Out??? any issues with clearances of the console when installed? I'm ok with some light trimming of inside of console, just don't want to start any real heavy cutting. If anyone has a good working setup, please let me know which Loc out lever you are using. Many Thanks for any input. ROB
__________________
1969 Camaro SS 396 X66 Lemans Blue 1969 Corvette 427/390 Lemans Blue |
#2
|
||||
|
||||
Following along.
Ryan W31
__________________
1969 Beaumont 350 Auto White Sold 1969 Beaumont 307 Auto Green Sold 1969 Chevelle SS 396-L35 Auto Blue Sold 1969 Oldsmobile Cutlass 'S' Sports Coupe W31 |
#3
|
|||
|
|||
The console with definitely need some trimming.
Dan
__________________
69 300 Deluxe Post Sedan Frost Green 69 SS396 300 Deluxe Post Sedan Lemans Blue SOLD 70 Buick Skylark Post Sedan Gulfstream Blue 70 Buick Skylark Post Sedan Burnished Saddle http://m.youtube.com/watch?v=PM3DE8qI2NY https://m.youtube.com/watch?v=Yn4xEmGypUw Last edited by Postsedan; 05-17-2020 at 11:32 PM. |
The Following User Says Thank You to Postsedan For This Useful Post: | ||
Rumbleguts396 (05-18-2020) |
#4
|
|||
|
|||
I don't think you can put one in without some cutting. Would love if someone could prove me wrong. I have not messed with one in decades.
Maybe a way to remote mount?
__________________
Don't believe everything you read on the internet ... Ben Franklin |
The Following User Says Thank You to Lynn For This Useful Post: | ||
Rumbleguts396 (05-18-2020) |
#5
|
||||
|
||||
My advice, make a faux lever. No one will be the wiser. Make sure it is out of the way and not interfering with shifter. Sounds like you want the “look”, but not willing to give up the bling (console). There is a paradox going on here. Extra levers just don’t seem compatible with a console without some serious hacking ( never tried this setup, so not giving 1st hand experience). That is unless you really need a functional one?
__________________
69 SS/RS 396 M20 X22 Nor 12B,72B,712 bought 1979 FULL OWNER HISTORY 69 Dick Harrell tribute Day II 427 M20 4.10 X11 76 orig pnt, 711 67 Super Stock 302 Camaro re-creation |
The Following User Says Thank You to bbbentley For This Useful Post: | ||
Rumbleguts396 (05-18-2020) |
#6
|
|||
|
|||
Why not just take the top plate off and fit it. you could be a used top plate on ebay for $50 or $60 and trim that one if needed.
|
The Following User Says Thank You to chevyandpontiac For This Useful Post: | ||
Rumbleguts396 (05-18-2020) |
|
|